Kibkom North Cyprus Forum

Can anyone help?
Does anyone know where from or if it is possible to buy spare parts for the above.
We are looking to replace a broken tap (lever control)
Thank you.
BBB's other half (now mopping up the kitchen floor .

I had the same problem with my Fuji watercooler. Halos were very good and stopped it leaking a few times but eventually they said that it needed a new part which would be quite expensive so we bought a new machine due to the age of ours.

If it is a genuine Fuji try taking it to Halos as, I believe, they are the importers of this make

Thanks for that but it is just the top part of the lever that has broken off and as it screws off the main part we were hoping we could just buy a replacement top part.
BBB's other half.

bigbadbob wrote:Thanks for that but it is just the top part of the lever that has broken off and as it screws off the main part we were hoping we could just buy a replacement top part.
BBB's other half.

Well, I'd still go to Halos

Try Tektan in town, they stock levers for a variety of brands and some universal ones. Take your old one with you as there are male and female ones.

They are a doddle to fit - unscrew anti-clockwise and fit new ones - cheap enough and no need for PTFE tape as the high quality nylon threads will seal watertight.

Agree with Groucho,
Tektan 0392 815 4434
http://www.cyprus-edirectory.com/D%C4%B ... 6-7-0.html
The tap comes complete, ready to screw in,
take the old one with you, to match the size.
Almost as easy as changing a light bulb
And safer, no ladders involved

Navek wrote:...Almost as easy as changing a light bulb

Aye, as long as you can get one with the right sized thread!

Bought a replacement tap from Halos 2 weeks ago - 20tl. Just unscrew the old broken one and replace with the new one.

Bought a tap from China Bazaar - 5tl
Easy to fit.

Thanks everyone.
BBB going to try and get to Halos tomorrow after work and giving Tektan a ring to go in on Wednesday his day off,
BBB's other half.