Emulsion

General Forum

Moderators: PoshinDevon, Soner, Dragon

Post Reply
User avatar
niceone
Kibkommer
Kibkommer
Posts: 397
Joined: Thu 14 Jun 2012 8:40 pm

Emulsion

  • Quote
  •   Message 1 of 11 in Discussion

Post by niceone »

Is Marshall the best emulsion?

We bought another brand before and it was rubbish !

User avatar
chiangbill
Kibkommer
Kibkommer
Posts: 383
Joined: Tue 03 Apr 2012 7:20 pm

Re: Emulsion

  • Quote
  •   Message 2 of 11 in Discussion

Post by chiangbill »

Well it's all made by this lot. http://en.wikipedia.org/wiki/AkzoNobel So can't be that bad eh. You could go to the South and get Dulux etc.

MoonageDaydream
Kibkommer
Kibkommer
Posts: 284
Joined: Mon 16 Apr 2012 2:50 pm

Re: Emulsion

  • Quote
  •   Message 3 of 11 in Discussion

Post by MoonageDaydream »

The Plus 'yapi' store on the outskirts of Famagusta (near the hospital) has an excellent range of emulsions in a range of different qualities. The staff are very helpful and some of them speak very good English. (Its a chain so I imagine there are other branches on the island).
They also sell stain blocker and PVA as well. We've found that in our apartment its better to put an undercoat of PVA solution on the wall before emulsioning.

13roman58
Kibkommer
Kibkommer
Posts: 1980
Joined: Sat 09 Feb 2013 9:29 am

Re: Emulsion

  • Quote
  •   Message 4 of 11 in Discussion

Post by 13roman58 »

Can you tell me the name of the P V A you used please

muffin
Kibkommer
Kibkommer
Posts: 381
Joined: Sat 13 Oct 2012 8:02 am

Re: Emulsion

  • Quote
  •   Message 5 of 11 in Discussion

Post by muffin »

Can anyone recommend an exterior paint that doesn't flake off after one year?

sophie
Kibkommer
Kibkommer
Posts: 5727
Joined: Wed 25 Jul 2012 3:42 pm

Re: Emulsion

  • Quote
  •   Message 6 of 11 in Discussion

Post by sophie »

Can someone also recommend ANYTHING other than flippin awful "plastic" emulsion paint which we were told was the best in the country and which you can peel off in long strips after a year!!

gates
Business contributing to forum
Business contributing to forum
Posts: 2267
Joined: Sat 25 Aug 2012 6:42 am

Re: Emulsion

  • Quote
  •   Message 7 of 11 in Discussion

Post by gates »

If you don't prepare the walls properly this will happen if you have used silicon paint then obviously that's it you cant put silicon on silicon you need to stabalise it first that's were you all go wrong get in a tosher that's what you get spend a bit more and you get a job done buy the right people

muffin
Kibkommer
Kibkommer
Posts: 381
Joined: Sat 13 Oct 2012 8:02 am

Re: Emulsion

  • Quote
  •   Message 8 of 11 in Discussion

Post by muffin »

All very well to say spend a bit more etc. We used recommended painters and paid them £2000.00 inc. materials which supposedly included stabiliser) 2 years ago and it has still pealed off. How can you tell if the correct materials are being used? it really is a lottery out here

User avatar
Keithcaley
Verified Member
Verified Member
Posts: 8359
Joined: Sat 21 Apr 2012 6:00 pm

Re: Emulsion

  • Quote
  •   Message 9 of 11 in Discussion

Post by Keithcaley »

I have found - and I'm sure that 'Gates' will correct me, if I'm wrong - that if you have a damp problem, then you need to get that fixed first, because otherwise, even with the best materials in the world, you will never manage to stabilise the surface successfully; damp driving 'salts' etc. out of the walls will cause anything you apply to peel and bubble...

Lottidotti
Kibkommer
Kibkommer
Posts: 188
Joined: Sun 08 Jun 2014 9:01 am

Re: Emulsion

  • Quote
  •   Message 10 of 11 in Discussion

Post by Lottidotti »

It's not the paint that is at fault it's poor preparation and or the quality of the build of the property.
Peeling paint is usually caused by damp or water ingress from poorly fitting windows,doors etc.Most property here is built by the Mediterranean standard and not UK standard.However if anyone has not had a problem with their houses in the UK it would be interesting to hear.

Kavenkoy
Kibkommer
Kibkommer
Posts: 280
Joined: Fri 22 Jun 2012 10:51 am

Re: Emulsion

  • Quote
  •   Message 11 of 11 in Discussion

Post by Kavenkoy »

As said it is damp that would cause the paint to peel so quickly and poor prep.
The damp proof courses are nil but you can vastly improve most of it yourselves .

Fitting airbricks could help the circulation of air improving ventilation.
It is easy to fit your own damp proof course at low levels.
The courses now fitted in UK after build are a drill bit and tube of damp silicone.
Unlike the old days of needing a machine these new courses simply use a larger tube of silicone and you inject through drill holes.

Scrape paint off and paint over with a SIKA (UK) name or I think in turkish it is IZOCARDI damp proof repellant few times .
Then when it's is all dry a coat of sealer paint before emulsion .

It will slow,it all down for you at least and cure majority .

If it is beyond easy repair then hacking off 3 meter from the area and re re rendering sand and cement finish with the SIKA in the mix will cure it .
Kav

Post Reply

Return to “THE KIBKOM NORTH CYPRUS FORUM”